SimulCharge™, Voltage Converter, 3 x USB Adapter for USB-C Mobile Devices
$94.99 / Web Price
The nSynC-vc3U provides compatible USB-C mobile devices* with SimulCharge™, a built-in voltage converter and three USB-A ports for peripherals. SimulCharge™ ensures the mobile device can simultaneously access any USB peripherals attached to the adapter while it is charging. The adapter also features Docking Detect technology.
The nSynC-vc3U can use an external DC power source, ranging from 9 to 36 volts. The DC-DC converter steps down the input voltage to a device-friendly 5 volts for use by the nSynC-vc3U and mobile device.
How the nSynC-vc3U Works
The nSynC-vc3U adapter provides compatible USB-C mobile devices with simultaneous charging and access to data (SimulCharge™). It features a built-in voltage converter, three USB-A ports for peripherals and Docking Detect technology.
The nSynC-vc3U’s on-board DC-DC voltage converter can take a power input of between 9 and 36 volts** and steps it down to the 5 volts required by most mobile devices***. The adapter can be used to supply power in permanent and semi-permanent installations (adhering to local electrical codes) with minimal installation cost. This eliminates the requirement for a licensed electrician to install and run a dedicated AC power line.
Power at a Distance
The adapter can also be installed up to 50 ft (15 m) from the AC power source. This means it can be installed in locations with limited electrical outlets and provides greater options for mobile device placement.
The nSynC-vc3U’s USB-A ports allow you to connect up to three peripherals, such as a scanner, printer and card reader for a tablet kiosk setup.
Reliable Device Connection
Docking Detect ensures the “greeting” protocols between the SimulCharge™ adapter and mobile device are executed correctly and consistently every time they are connected.
This allows the adapter to be a plug-and-play technology that ensures the mobile device always operates in USB Host mode.
The adapter comes in a black ABS casing that protects the electronics from mild shocks and impacts, allowing it to be used in different implementations. It does not ship with the USB-C to USB-C cable required to connect the adapter to the mobile device. This cable can be purchased separately from LAVA or a third-party supplier.
*The nSynC-vc3U is not compatible with all USB-C mobile devices. Please see the list of tested devices.
**The 9-36V DC power supply is not included with the adapter and must be purchased separately. ***The mobile device can also be powered through the adapter’s USB-C port, which is rated for the standard 5 volts at 2 amps. It is recommended to use the charging cable that came with the mobile device. A separate power supply is not included.