SimulCharge™, Voltage Converter, 1 x USB Adapter with RBM Technology for USB-C Mobile Devices
$99.99 / Web Price
The eSynC-vc1U provides compatible USB-C mobile devices* with SimulCharge™, a built-in voltage converter and one USB-A port for a peripheral. SimulCharge™ ensures the mobile device can simultaneously access any USB peripherals attached to the adapter while it is charging. The adapter also features RBM technology.
RBM’s Battery Modulation protects the mobile device’s battery from constant overcharging, which can degrade the battery over time and shorten its lifespan
The eSynC-vc1U can use an external DC power source, ranging from 9 to 36 volts. The DC-DC converter steps down the input voltage to a device-friendly 5 volts for use by the eSynC-vc3U and mobile device.
How the eSynC-vc1U Works
The eSynC-vc1U adapter provides compatible USB-C mobile devices* with simultaneous charging and access to data (SimulCharge™). It features a built-in voltage converter, one USB-A port for a peripheral and RBM technology.
The eSynC-vc1U’s on-board DC-DC voltage converter can take a power input of between 9 and 36 volts** and steps it down to the 5 volts required by most mobile devices***. The adapter can be used to supply power in permanent and semi-permanent installations (adhering to local electrical codes) with minimal installation cost. This eliminates the requirement for a licensed electrician to install and run a dedicated AC power line.
Power at a Distance
The adapter can also be installed up to 50 ft (15 m) from the AC power source. This means it can be installed in locations with limited electrical outlets and provides greater options for mobile device placement.
The eSynC-vc1U’s USB-A port allows you to connect a peripheral, such as a scanner, printer or card reader for a tablet kiosk setup.
Robust Battery Protection
Battery Modulation protects the mobile device from overcharging and its battery from bloating, which can cause severe damage to the device. The LAVA Tablet Manager (LTM) app, installed on the mobile device, monitors the battery level and users can set upper and lower charging thresholds for the battery.
When the battery charges to the higher threshold, the adapter turns off charging and the mobile device is allowed to discharge until it hits the lower threshold. This ensures the battery never overcharges, even if it is left plugged in 24/7. Battery Modulation extends the lifespan of both the battery and device for a better return on investment.
RBM also features Screen Brightness Management, which lets customers set a daytime and night-time brightness level through the LTM app, as a way to combat overheating. This allows for the mobile device to have a bright display during the day when the business is open and a dimmer display at night after it closes. The display is one of the biggest sources of heat for a mobile device. Excess heat puts additional strain on the battery and can also accelerate battery bloating. Dimming the display during off-hours significantly reduces its heat generation, prolonging the lifespan of the device.
The adapter comes in a black ABS casing that protects the electronics from mild shocks and impacts, allowing it to be used in different implementations. It does not ship with the USB-C to USB-C cable required to connect the adapter to the mobile device. This cable can be purchased separately from LAVA or a third-party supplier.
*The eSynC-vc1U is not compatible with all USB-C mobile devices. Please see the list of tested devices.
**The 9-36V DC power supply is not included with the adapter and must be purchased separately.
***The mobile device can also be powered through the adapter’s USB-C port, which is rated for the standard 5 volts at 2 amps. It is recommended to use the charging cable that came with the mobile device. A separate power supply is not included.